Step 1
Open the box delivered to your
home. Inside the box you should find the Linksys phone adapter,
power supply and one ethernet cable (blue). The power supply will
come in two parts. Simply slide the small black plug portion onto
the large black power supply. |
|
Step 2
Locate your Internet connection
from WisperTel. This is the line that comes into your home from the
outside and then plugs into the Motorola ethernet power adapter.
You can easily locate this connection by finding your Motorola
power adapter and following the wire from the adapter to the end
with the small box and black wire. Typically you find this plugged
into your computer or router if you have one. Leaving this page
open on your computer, unplug this connection. |
|
Step 3
Place the Linksys phone in a location
near a phone jack and convenient for use. Near the computer is
usually the most convenient location.
Insert the end for the Linksys
power supply into the phone adapter and plug other end into a power
source. |
|
Step 4
Take the end of your Internet
connection you found in Step 2 that was plugged into your computer
or router and plug into the blue slot called "Internet."
|
 |
Step 5
Take the blue ethernet wire that
was included in the Linksys phone adapter box and plug it into
the yellow slot called "ethernet."
The the other end of the blue
ethernet wire should be plugged into the same location on your
computer or router from which you just unplugged the black connector. |
 |
Step 6
Plug the wire going from your
phone into the Linksys phone adapter slot labled "Phone 1."
WARNING: Do not plug a phone cord
from a wall jack into the phone adapter as it will cause the device
to short out. |
 |
The back of your device should
now look like this.
|
 |
Step 7
Turn the Linksys phone adapter
so that you can see the lights. You should now see the first three
lights turned on.
Light 1 is the power light and
should be solid.
Light 2 light will flash as
traffic for the Internet pass through.
Light 3 indicates phone service
is available and will flash for 30-60 seconds and then go solid
green. It will flash during a phone call. |
 |
Step 8
Test your connection by picking
up the phone. You should now hear a dial tone. Use the phone and
enjoy WisperTel Unlimited Phone. |
 |